Training Instrumentation for Oil and Gas


Dipasang 07 Jan 2016 | Dilihat: 130 kali | No: #0072
Bagikan Laporkan Cetak Favorit
Jenis: Training
Jadwal: Rutin
Metode: Tatap Muka
Durasi: 3 hari
Peserta: Umum
Lokasi: Hotel Berbintang
Alamat: Yogyakarta
Kota: Yogyakarta
Kota Lain: Semarang, Solo, Bandung, Jakarta, Balikpapan, Surabaya, Jogja, Lombok, Malang, Makassar and Batam
Ringkasan: Instrumentation is the use of measuring tools to monitor and control the process. It is the art and science of measurement and control variables in the production process, laboratory, or manufacturing areas.
Investasi: Rp. 6.000.000

Training Instrumentation for Oil and Gas


DESCRIPTION

Instrumentation is the use of measuring tools to monitor and control the process. It is the art and science of measurement and control variables in the production process, laboratory, or manufacturing areas.

Instruments used for oil & gas companies are some devices that measure physical quantities such as flow, temperature, level, distance, angle, or pressure. These instruments may be as simple as reading a thermometer directly or may be complex multi-variable analysis process. Instruments are often found in parts of control systems in refineries – oil refinery in the oil & gas companies, factories, and vehicles. Process control is one of the main branches are applied in instrumentation. This instrumentation can also refer to a handheld device that measures several variables desired. Handheld instrumentation common variety in the laboratory, but can be found in the household as well. For example, the smoke detector is a tool that is commonly found in most homes west.

Instruments attached to the control system and can provide a signal which is used to operate the solenoid, valve, regulator, fuse, or relay. This device controls the desired output variables, and provide the ability to both remote and automatic control. This is often referred to as the final control element when controlled remotely or with the control system.

OBJECTIVE

    To understand the scope and utilization of instrumentation and process control technology applicable to oil & gas industry.

CONTENT

    Instrumentation Symbols and Nomenclature (P&I Diagram)
     Measuring Devices in Oil & Gas Industry

        Level
        Pressure
        Flow
        Temperature
    Process Control Principles (Control Objectives) for Oil & Gas Industry
     Feedback Control Loops, Controllers (Control modes & Types) for Oil & Gas Industry
     Control Valves:

        Types
        Flow Characteristics
        Actuator Types
        Valve Positioners
    Process Control Systems:
        Control Cascade,
        Ratio and
        Feedforward Control
    Tuning Control:
        P,
        PI,
        PID
    Alarm and Shutdown Devices in Oil & Gas Industry
    Lab. Work in Oil & Gas Industry
    Discussion and Case Study.


METODH

Kegiatan pelatihan dirancang agar peserta dapat memahami secara komprehensif materi yang disampaikan, sehingga dapat dimplementasikan secara aplikatif dalam dunia kerja. Adapun metode yang digunakan adalah:
    Presentation
    Discuss
    Case Study
    Evaluation

TIME AND PLACE

Training ini diselenggarakan secara berkala pada bulan:
Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember

Diselenggarakan dikota-kota:
Semarang, Solo, Yogyakarta, Jakarta, Balikpapan, Surabaya, Bali, Lombok, Batam dan Kota-kota Lainnya

Terkait dengan tempat dan waktu secara detail, silahkan menghubungi kami atau me-request sesuai dengan permintaan (mengisi form pada info kontak)

FACILITY

    Training Hand Out
    Digital Material
    Certificate
    Exclusive Souvenir
    Qualified Bag
    Training Photo
    Training room with full AC facilities and multimedia
    Once lunch and twice coffee break every day of training
    Qualified Instructor
    Transportation from airport / railway to hotel and from hotel to the training venue (2 person from one company)

Topik serupa: Training Instrumentation for Oil and Gas

 

Training Process Operation in Oil and Gas Industries

Dipublikasikan 07 Jan 2016 di Pertambangan
Jadwal Training: Rutin | Durasi: 3 hari | Investasi: Rp. 6.000.000
Kota: Yogyakarta | Semarang, Solo, Bandung, Jakarta, Balikpapan, Surabaya, Jogja, Lombok, Malang, Makassar and Batam

Pelatihan ini bertujuan untuk memberikan pengetahuan dan pemahaman tentang operasi dari plant pemrosesan minyak dan gas. Pelatihan akan diawali dengan pembahasan mengenai sifat dan karakteristik dari hydrocarbon sebagai komponen utama penyusun minyak dan gas.

 
 

Training INDUSTRI HILIR MIGAS

Dipublikasikan 07 Jan 2016 di Pertambangan
Jadwal Training: Rutin | Durasi: 3 hari | Investasi: Rp. 6.000.000
Kota: Yogyakarta | Semarang, Solo, Bandung, Jakarta, Balikpapan, Surabaya, Jogja, Lombok, Malang, Makassar and Batam

Secara singkat, pengolahan adalah kegiatan memurnikan, memperoleh bagian-bagian, mempertinggi mutu dan mempertinggi nilai tambah minyak bumi dan atau gas bumi, tapi tidak termasuk pengolahan lapangan.

 
 

Training BASIC PETROLEUM ENGINEERING (PETROLEUM ENGINEERING FOR NON ENGINEER)

Dipublikasikan 07 Jan 2016 di Pertambangan
Jadwal Training: Rutin | Durasi: 3 hari | Investasi:
Kota: Yogyakarta | Semarang, Solo, Bandung, Jakarta, Balikpapan, Surabaya, Jogja, Lombok, Malang, Makassar and Batam

This course provides introduction to the petroleum industries and petroleum engineering activities. The coverage starts from introducing the petroleum (oil and gas) industries, and it is followed by the illustration and description of oil and gas reservoir (what is it really looks like?)

 
 

Training FIELD OF DEVELOPMENT, BUDGETING & RISK ASSESSMENT (POD, AFE, AND WP & B)

Dipublikasikan 10 Jan 2016 di Pertambangan
Jadwal Training: Rutin | Durasi: 3 hari | Investasi: Rp. 6.000.000
Kota: Yogyakarta | Semarang, Solo, Bandung, Jakarta, Balikpapan, Surabaya, Jogja, Lombok, Malang, Makassar and Batam

Petroleum Industries in Indonesia are managed by the Government of the Republic of Indonesia, under Law No. 22 / 2001. Control system built up by BPMIGAS is done through pre control system, current control system and post control system.

 
 

Training PENERAPAN PTK 007 REVISI 3 SEBAGAI PEDOMAN PENGADAAN BARANG DAN JASA INDUSTRI HULU MIGAS

Dipublikasikan 18 Jan 2017 di Pertambangan
Jadwal Training: Rutin | Durasi: 3 hari | Investasi: Rp. 7.500.000
Kota: Yogyakarta | Yogyakarta, Jakarta, Bandung, Malang, Surabaya, Solo kota lain silahkan request

Pengadaan barang dan jasa merupakan kegiatan untuk memperoleh barang / jasa oleh KKS yang prosesnya di mulai dari perencanaan kebutuhan sampai diselesaikannya seluruh kegiatan untuk memperoleh barang dan jasa.

 

Bantuan cepat InfoTrainingIndonesia.com
Administrasi | Manajemen | Pemasaran | Keuangan | Bisnis - Usaha | Sumber Daya Manusia | Hubungan Masyarakat | Hukum | Pemerintahan
Pendidikan | Kesehatan - Keselamatan | Tehnologi Informasi | Kontruksi - Bangunan | Mekanik - Kelistrikan | Industri | Pertambangan
Pertanian - Perkebunan | Sertifikasi